Aṣiṣe ọna kika imeeli
emailCannotEmpty
emailDoesExist
pwdLetterLimtTip
inconsistentPwd
resetAccountPassword
forTheAccount
pwdLetterLimtTip
inconsistentPwd
resetSuccess
resetSuccessTips
login
Iroyin
How to Avoid Blisters in Aluminum Alloy Die Castings
July 14,2022
Aluminum alloy die-casting is a part of working pressure forging. It is a working pressure casting mechanical aluminum die-casting machine equipped…
Ka siwaju
Quality Problems Encountered in Nodular Cast Iron Casting Production
July 14,2022
General rules affecting shrinkage porosity of ductile iron
Modulus of ductile iron castings. The modulus of the casting is greater than 2.5, so…
Ka siwaju
What Are the Processing Characteristics of Aluminum Alloy Die Castings
July 14,2022
The reason for the immediate shortcomings of aluminum alloy die-casting is generally due to the wrong planning and plan of the abrasive tool and…
Ka siwaju
What Tools are Needed in the Process of Cast Iron Processing?
July 14,2022
Cast iron can be classified into; Grey cast iron, white cast iron, malleable cast iron, nodular cast iron, vermicular cast iron, alloy cast iron, etc.…
Ka siwaju
What Are the Requirements for the Processing Stability of Aluminum Alloy Die Castings
July 14,2022
So how can we control the temperature very well? In fact, it is not difficult. For example, the capacity of the abrasive tool cannot be very large or…
Ka siwaju
Talking about the Film in Cast Iron(2)
July 14,2022
In general, the above results well explain some phenomena observed in cast iron factories. For general grade gray cast iron, the surface of molten…
Ka siwaju
Talking about the Film in Cast Iron(1)
July 14,2022
When the molten iron is kept at a high temperature (1500 ℃) in a furnace or a molten iron ladle lined with traditional refractory materials such as…
Ka siwaju
How to Deal With Small Shrinkage Holes on the Surface of Aluminum Alloy Die Castings
July 14,2022
Aluminum alloy die castings themselves have hard points:
One is that after the raw materials of aluminum alloy die-casting parts…
Ka siwaju
Heat Treatment of White Cast Iron
July 14,2022
White cast iron has high hardness, can not be cut, and is very brittle, so it is rarely directly used to manufacture machine parts. Generally…
Ka siwaju
What Are the Relevant Characteristics of Aluminum Alloy Die Castings
July 14,2022
Aluminum alloy die-casting is a part of working pressure forging. It is a working pressure casting mechanical aluminum die-casting machine equipped…
Ka siwaju
What Are the Components of the Die Casting Mold
July 14,2022
The die-casting part is composed of two parts, one for covering and one for theme activity, and the part where they merge is called the analysis line.…
Ka siwaju
Die Casting Parts Under the Die Casting Process
July 14,2022
Aluminum die casting is a metal material forging process, which is characterized by the use of an abrasive cavity to release high pressure on the…
Ka siwaju
Pe wa
Awọn afi ọja
Pe wa
Jọwọ fun ibeere rẹ ni fọọmu ni isalẹ. A yoo dahun fun ọ ni awọn wakati 24.